Whenever leaks are detected in a home plumbing system, it is important to quickly investigate the situation. According to trusted leak detection Melbourne specialists, if the leaks are unattended and undetected, a lot of water is lost, pipes can end up corroded and it is a certainty that major damage will appear. As pipes have leaks, it is possible to end up with home appliance damage and health problems can become reality. Because of this, you need to be aware of the following tips that help detect the presence of water leaks.
Carefully Listen Around The Home
You want to turn off the entire water supply to the appliances and all other fixtures that use them. Then, a simple thing to do is to listen for dripping or leaking water. If this is something that you hear, there is a leak that needs to be fixed as soon as possible.
Use Your Water Meter
The water meter helps you out a lot in detecting the existence of a leak. Check the digits that are present and see if the number gets higher even if you do not use water. If this is the case, there is a water leak somewhere.
Use A Leak Radar
The radar can help you out a lot in the event that there is a high possibility that there is an outside leak that is affecting your home. It helps by finding the exact leak point, showing you if the problem that you are faced with is large or small. The radar practically sends waves through various materials and then the machine gets signals back. We are talking about a really simple to use instrument that can help you figure out if there is a leak present.
Use Gas In The Water Pipes
This is a highly efficient leak detection method that can be used inside homes. If easy water pipe access exists, industrial hydrogen can be added and then tracked as it goes through the pipes. This is a gas that moves at really high pressure. In the event that a leak is present, it can easily be detected as gas leaks are much easier to detect than water leaks.
Use A Geophone
This device’s main function is similar to that of the common stethoscope. As a leak is present, the geophone can detect it through sound. The sound that is generated by the water leak is practically amplified and you can hear it. The only problem is that the geophone cannot actually detect larger water leaks. This is due to the fact that as water goes through larger holes, loud noises are not present.
Final Thoughts
Keep in mind that in many cases you might end up knowing there is a leak but cannot actually identify it. Unfortunately, this makes many just go from one pipe to the next. This is not a good approach. If you did all you could and couldn’t find the location of the water leak, the very best thing you can do is contact a plumber.